GDJS/GDJW High and Low Temperature Humidity Chamber is Designed According to IEC 60068-2-1 Environmental Testing Part 2-1: Tests-Test A: Cold

The full name of IEC 60068-2-1 is Environmental Testing Part 2-1: Tests-Test A: Cold. It is edited by the IEC technical committee in 2008.We will introduce the IEC 60068-2-1 Environmental Testing Part 2-1: Tests-Test A: Cold

The following is the original content of IEC 60068-2-1

IEC 60068-2-1 Environmental Testing Part 2-1: Tests-Test A: Cold

This part of IEC 60068 deal with cold tests applicalbe to both non heat-dissipating and heat-dissipating specimens. For non heat-dissipating specimens, Tests Ab do not deviate essentially from earlier issues. Test Ae has been added primarily for testing equipment that requires being operational throughout the test, including the conditioning periods.

The object of the cold test is limited to the determination of the ability of components, equioment or other articles to be used, transported or stored at low temperature.

Cold tests cover by this standard do not enable the ability of specimens to withstand or operate during the temperature variations to be assessed. In this case, it would be necessary to use IEC 60068-2-14.

The cold tests are subdivided as follows:

- Cold tests for non heat-dissipating specimens

. with gradual change of temperature, Ab;

- Cold test for heat-dissipating specimens

. with gradual change of temperature, Ad,

. with gradual change of temperature, specimen powered throughout, Ae.

The procedures given is this standard are normally intended for specimens that achieve temperature stability during the performance of the test procedure.

LISUN designed the GDJS/GDJW High and Low Temperature Humidity Chamber according to the IEC 60068-2-1 standard. It is used to test the CFL/LED which meets IES LM-80-08, electricity products, electronic components, material and so on. We will update the procedure and testing parameters according to the updating of the IEC 60068 standard.
    
The following is the picture GDJS/GDJW High and Low Temperature Humidity Chamber

    
The following is the video of GDJS/GDJW High and Low Temperature Humidity Chamber


Lisun Instruments Limited was found by LISUN GROUP in 2003. LISUN quality system has been strictly certified by ISO9001:2015. As a CIE Membership, LISUN products are designed based on CIE, IEC and other international or national standards. All products passed CE certificate and authenticated by the third party lab.

Our main products are Goniophotometer, Spectroradiometer, Integrating Sphere, LED Test Instruments, CFL Test Instruments, Photometer and Colorimeter, EMC & EMI Testing, Surge Generator, Electrical Safety Testing, Environmental Test Chamber, IP Waterproof Test Equipment, Dustproof Test Chamber, High and Low temperature Humidity Chamber, Plug and Switch Testing, AC and DC Power Supply.


Please feel free to contact us if you need any support.

Tech Dep: Service@Lisungroup.com, Cell/WhatsApp: +8615317907381
Sales Dep: Sales@Lisungroup.com, Cell/WhatsApp: +8618917996096